[vsampier]

"Gearing Up To Trade"

If you want to try and visualize in your mind, the
relationship of Time and Market Time, then try to
picture this: (Refer to attached picture)

Imagine a Gold Metalic Gear Wheel, with a fixed number
of 'teeth'- let's say it has 365 Teeth (Gear B) and it
is rotating. The 'teeth' on this gear are positioned
at linear fixed distances to each other around
the gear wheel. The width of these 'teeth are
also fixed and uniform around the gear wheel.
This gear represents our Time clock.

Now imagine a 2nd Gear with a fewer number of fixed 'teeth'-,
let's say it has 40 Teeth as an example (Gear A), and it is
also rotating. The 'teeth' on this 2nd gear occur at varying
non-linear distances around the gear wheel, and the width
of these teeth will also vary. The 'teeth' on this 2nd gear wheel
are our Exchange Points, and the spaces between the 'teeth' are
our Epochs. We will come back to this 2nd gear, in a moment.

Now hold those 2 pictures in your mind, a moment, and add this
to the picture set:

Picture a common brass house key that you need to make a copy of.
Usually you bring the original key to a hardware store and the
Locksmith will select the correct size metal key blank, and put
it and your original key in a key cutting machine. The machine
will then proceed to replicate the unique pattern of notches or
'teeth' that the original key has, cut into the new key blank.
That pattern - or sequence of 'teeth' on the key makes it unique
to the specific lock that it will open. These teeth are usually
positioned in some non-linear fashion.

Now let's return to that 2nd Gear wheel. Each market has a unique
pattern of 'teeth' that it will use on the gear wheel. So even
though this 2nd gear *wheel* may have a fixed number of 40 'teeth',
the EUR/USD market's individual Swings, Waves, Trends etc., will
start and end on particular teeth on that wheel. For example, lets
say the EUR/USD uptrend ends on the 6th 'tooth' on this gear wheel,
and then the ensuing downtrend may end on the 23rd 'tooth' on this
gear wheel, and so on and so on. This means that every market,
EUR/USD, GBP/USD, USD/JPY, USD/CHF, IBM stock, Soybeans, etc. have
their own unique pattern of which teeth around this 2nd gear wheel
are the places that the individual swings for this market start and stop.
Each market 'overlays' its unique sequence of Exchange Points and Epochs
on top of this 2nd gear wheel. Thereofore each market has it's own
Market Time (pattern + sequence of specific Exchange Points and Epochs
where trend reversals occur). This is why, not all Exhange points will
produce trend reversals. It depends on the unique overlay pattern of the
Market you are analysing.

The Exotorus Chart shows the Relationship between our Time (Gear B) and Market Time (sequence pattern overlayed ontop of Gear A). Once the particular sequenceor pattern for a specific Market is known, it can be used along with the Exchange Points and Epochs to project future trend reversals and swings.

The 'crown jewels' of this technique, are the ability to identify the Exchange Points (teeth), and to identify the unique number and sequence of Epochs for each swing. Once this is known, the series perpetually repeats or rotates. I have discovered how to identify these Non-Linear Exchange Points (teeth) and Epochs, on this 2nd gear wheel.

As a mortal, the difficult part to all of this is to identify the sequence of Exchange Points and Epochs that the EUR/USD is riding across. Also, with Phantom Exchange Points, identifying reversals becomes slighly more difficult. This is where human error can come into play. That is why I still remain humble, as I still try to continue my research, and master this 'Law of Vibration'.